|
Model
: 7000FM |
|
|
¡Ü Gas Filter Correction IR Gas Analyzer ¡Ü Single beam optics ¡Ü ppm¿¡¼ 100%±îÁöÀÇ ±¤¹üÀ§ÇÑ Range ¡Ü Automatic microprocessor operaton ¡Ü ³ôÀº °¨µµ°¡ ¿ä±¸µÇ´Â °÷¿¡¼ÀÇ Àû¿ë¿¡ ÀûÇÕÇÑ °í¼º´É °è±â ¡Ü ÃøÁ¤°¡½º : CO2, Co, NO, SO2, CH4 µî
|
|
|
|
|
|
|
|
Detector Non dispersive infra-red gas correlation rotary filter system with solid state detector.
Response Typically less than 15 seconds (5-95%) at 1 l/min flow, with time constant of 2 seconds
Bypass Flow sensitivity Less than ¡¾1% change in reading from 0.2 to 2.0 I/min into ambient pressure exhaust.
Accuracy & Repeatability Better than ¡¾1% of range or +/- 0.2 ppm, whichever is greater.
Linearity Better than ¡¾0.5% of range
Ambient Temperature Effects Zero: ¡¾0.2% per ¡É of highest range from 5¡É to 30¡É Span: Less than ¡¾0.35% of range from 5¡É to 30¡É Chart recorder output: add ¡¾0.02% of range per ¡É
Drift Zero and span drift are less than 1% of range in 1 hour at constant temperature and pressure.
Display 240¡¿64 pixel LCD display with switchable back-light shows concentration units and gas in large clear characters.
Outputs Non isolated 0-10Vdc, isolated 4-20mA analogue outputs of displayed range. Range analogue output is supplied.
Remote control Serial inerface using RS232. All functions by 'AK' protocol with variable baud rate between 1200 and 19200.
Autocalibration Controlled by microprocessor, RS232 or switched logic.
Sample condition Gas to be analysed must not exceed 40¡É, with a dew point of 10¡É below local ambient temperature.
Safety All high voltage/current circuits are shielded within the analyser
Dimensions 19" Rack or bench mount 3U high. 550mm behind mounting face, 45 mm in front of mounting face.
Services Sample, span and zero inlets -1/4" tube fittings, bypass outlet 3/8". Zero grade N2 for zero calibration and dual cell purge. Span calibration gas.
Approximate weight 13kg
Power Switchable between 115V and 230V AC ¡¾ 15%, 50Hz and 60Hz compatible. Max power consumption 200 VA(warm up). |
|
|