|
Model
: 4000VM |
|
|
¡Ü Heated Vacuum chemiluminescent NOX Analyzer ¡Ü Raw exhaust gas ÃøÁ¤ ¡Ü Heated reaction chamber ³»Àå ¡Ü Automatic microprocessor operation ¡Ü Dry vacuum pump ³»Àå ¡Ü No, NO2, NOX ÃøÁ¤ ¹× NH3 ÃøÁ¤ °¡´É (option) |
|
|
|
|
|
|
|
Detector Chemiluminescent. NO + O3 ¡æ NO2 + O2 + photon Cooled Photomultiplier Sensor
Ranges 0-4, 10, 40, 100, 400, 1000, 4000, 10000 ppm plus auto-range
Response time 1.5s (5% to 95%)
Bypass flow sensitivity Less than 1% from 1 to 3 l/min.
Accuracy and repeatability Better than ¡¾1% range or ¡¾0.2 ppm which ever is the greater.
Temperature effect Zero: Less than ¡¾0.5 ppm from 5¡É to 35¡É Span: Less than ¡¾ 0.33%/¡É
Noise Less than ¡¾0.5% ppm or ¡¾0.1% of range.
Linearity ¡¾2% of point or ¡¾1% FSD on all ranges down to 10% of range.
NO2 to no converter 95% efficient requiring periodic checking (use Signal NOXGEN tester). Converter Temperature adjustable from the front panel.
Ozoniser Generates O3 from air with negligible NO production Air must have less than -12¡É dew point
Converter efficiency Greater than 95%
Display 240¡¿64 pixel LCD display with back-light shows concentration, units and gas in large clear characters.
Remote control All functions by 'AK' protocol using RS232 port.
Outputs 0-10 Vdc and isolated 4-20 mA analogue outputs of display range.
Power Dual voltage 115 Vac or 230 Vac ¡¾15% switchable on the rear panel.
Options High corrosion resistant dry vacuum pump. Specify mains voltage required. Pump Control Adaptor. NO2 Measurement.
Environment 5-40¡É ambient temperature. 95% R.H. non-condensing.
Dimensions 19" rack mounting 3U high. (133.5 mm) Depth behind mounting face 590 mm. Protrusion in front of mounting face 45 mm. Weight approx. 35kg Services Air at 520 ml/min with a dew point of less than -12¡É for the ozoniser. NO in N2 diluent for span calibration. 100% N2 for zero calibration.0 psi maximum.
|
|
|