|
Model
: Nimbus |
|
|
¡Ü Infrared Flammable gas detector ¡Ü Hydrocarbon ¹× CO2 °ËÁö ¡Ü 4~20mA ¿Í RS485 output °¡´É¡Ü 10³â ÀÌ»óÀÇ ±ä ¼ö¸í
|
|
|
|
|
|
|
|
Function : The detection of hydrocarbon gases C1 to C5 and ethylene in the 0-100% LEL range by means of infrared absorption
Dimentions : 125(l) x 170(w) x 210(h)mm
Construction : LM25 marine grade alloy, polyester powder coated
Optical System : Dual wavelength, dual detector
Optical performance. Correct operation with up to 90% obscuration,. Dirty optics warning above 75% (configurable). Heated optics to avoid condensation.
Operating voltage : 10 to 32V dc (nominal 24V)
Typical output signals : All levels configurable, simultaneous sink and source output. 0mA : fault 2mA : dirty optics 4-20mA : 0-100% LEL 24mA : over range
Status light : Green ; normal function Yellow ; fault Red ; detecting gas 22 other conditions indicated by flash rate
Communications : Modbus RS485 serial link
Functional testing : Gas chamber of flow adaptor for gassing
Accuracy : Zero stability < 1% LEL, ¡¾5% of gas reading
Repeatability : ¡À2% of gas reading
Response time : < 7 seconds ; T90 < 3 seconds ; instantaneous high levels of gas
Temperature range : -40¡É to +65¡É
Humidity range : 0 to 99% RH non-condensing
Approvals : EEx d IIB + Hydrogen T6
Light immunity : Totally immune to all external light, both constant and modulated
General immunity : Totally immune to all catalyst poisons. |
|
|